Skip to Content

Why is the Temperature Indication on My Samsung Fridge Blinking?

Why is the Temperature Indication on My Samsung Fridge Blinking?

You will be worried if your Samsung fridge is blinking temperature, and you can’t understand why it’s doing so. 

A blinking temperature display could be that your fridge is trying to get your attention because it has sensed that the temperature inside is above 590F. For example, the temperature inside might get this high if you left the fridge’s door open for too long, stored hot food inside, or your fridge is new and adjusting. 

You can fix the Samsung refrigerator blinking error code by not allowing warm or hot air in the fridge. Here’s how you can stop the Samsung fridge temperature from blinking:

Why is My Samsung Fridge Temperature Flashing?

Here are some common reasons why you are seeing a red light on your Samsung fridge temperature:

  • You stored hot food in the fridge.
  • You left the door open for too long.
  • Your fridge is new and trying to adjust.
  • Your fridge door has air holes.
  • Your fridge is reacting to a power outage.
  • Your freezer has frost build-up. 

Possible Solutions to the Samsung Fridge Blinking Temperature Issue

High temperature inside your Samsung fridge or freezer is the most common cause of your Samsung fridge temperature blinking. You can reduce the temperature in your fridge by applying these techniques:

Give Your New Fridge Time

You shouldn’t be worried if you have just bought a new Samsung fridge and see the temperature blinking after installing it. The temperature tends to blink if you connect your fridge to the mains for the first time, which means that the freezer or fridge is still too warm.

Don’t open the fridge’s door when you see the blink; give the fridge time to adjust, and the red light will go off. 

Deal With the Temperature

The inside temperature of your fridge shouldn’t go past 590F. The average temperature should be 40F or 380C. The freezer’s temperature should be 120C or 00F. If the temperatures are above average, the light will blink to indicate a problem. You might also hear a bell sound. 

Change the temperature to a lower setting if it is above average. After this, allow the fridge about four hours to adjust; you won’t see the blinking light or hear the bell sound. 

Don’t Put Hot Foods in the Fridge

Putting hot food in the fridge will increase the appliance’s temperature; therefore, the fridge temperature light will flash to notify you of a problem.

If you put hot food in the fridge, remove it, let it cool down, and then store it later in the fridge. 

Check the Door

The temperature light will blink if you leave you do not close the refrigerator door correctly or if you leave it open. 

Hot air enters the fridge, causing the temperature to rise, and reduces the cold air inside the freezer. Therefore, your fridge might start blinking to notify you that the temperature inside is too high or abnormal. 

You can check whether the fridge door is correctly closed. If not, close it tightly. It’s best also to confirm whether the fridge door has holes, gaps, or cracks because these spaces will let warm air into the fridge. When this happens, it will interfere with the inside temperature, causing the refrigerator to blink.

Check if the Freezer Has Frost Build-Up

Your freezer will not function properly if it has frost build-up. Too much frost will interfere with the temperature requirement in the appliance. 

It’s best to check if there’s too much frost build-up in your freezer, then defrost it manually, and see if the blinking will stop. 

Restart the Fridge

If you’ve tried the above solutions, but the fridge temperature still blinks, it might mean that some settings are incorrect. 

Restarting the fridge might fix the problem or any incorrect settings. You can restart the fridge by turning off or unplugging the circuit breaker that powers it. 

Once you’ve restarted it, give it some time, and power it back on. 

Reset the Temperature

Some digital fridges display the temperature they are operating on, on their display. Therefore, it’s quite simple to choose the temperature you wish. 

If the fridge is still hot, but your screen shows the correct temperature, you can reset the temperature using the following steps:

  • Locate the control panel. You can find it in your fridge’s ice dispenser.
  • Set the temperature. Please press the button on your fridge until it reaches the desired temperature. 

Once you see a new temperature setting on your fridge, you’ll know that the temperature has been reset. Therefore, the fridge should now work well without blinking. 

Check this too: How to Get Your Samsung Fridge Out of Demo Mode

Give the fridge a few minutes as the temperature is resetting. Don’t open the fridge door or store items inside. 

Service Your Fridge

Your Samsung fridge might need servicing if it’s still blinking temperature even after trying the above fixing steps. You might also experience such issues if you fail to service your fridge regularly. 

Therefore, you might have to call an expert to check your appliance, and if there’s a bigger issue, they can fix it. 

If the problem persists and your fridge has a valid warranty, you can call Samsung customer support. 

Your Samsung fridge temperature display will blink if the temperature inside the fridge is above 590F. It will automatically stop blinking after the temperature goes back down. You can try the solutions above to ensure that the temperature goes down. You can also contact an expert or Samsung customer support if none of the solutions help.